Web Menu

Product Search

Language

Share

Tile Adhesive Formulation Solutions

-- Steady & Reliable Manufacturer --

A targeted combination of HPMC and HEMC grades for tile adhesive manufacturers, formulated to extend open time, improve non-slip performance and support strong, durable bond formation.

Product Overview

This selection is focused on cement-based tile adhesive systems, including standard and improved performance classes, where cellulose ether controls the migration of mixing water into porous substrates and tile backs so the adhesive stays workable and bonds properly rather than drying out prematurely.

Working in combination with redispersible powder, these grades help balance flexibility and bond strength, while fineness and dissolution rate influence how smooth the wet mortar feels under the trowel and how easily it spreads without dragging.

ParameterTypical Value
AppearanceWhite to off-white powder
Viscosity (2% solution, mPa·s)20,000 - 80,000, grade dependent
pH (1% solution)6.0 - 8.0
Moisture content≤ 6%
Fineness (through 100 mesh)≥ 98.5%
Water retention rate (30 min)97% - 99%
Gel temperature58 - 64°C
Open time contribution20 - 30 minutes, formula dependent
Ionic characterNon-ionic
Packaging25 kg bag, or as agreed

Application

Suitable for floor and wall tile adhesive, natural stone adhesive, large-format porcelain tile adhesive, and exterior facade tile bonding systems where reliable open time and bond strength are essential.

  • Cement-based standard and improved performance tile adhesives
  • Large-format and porcelain tile bonding mortars
  • Natural stone adhesive formulations
  • Exterior facade tile bonding systems
  • Renovation and tile-on-tile adhesive applications

When combined appropriately with redispersible powder, these grades support good non-slip performance for vertical tile installation, an important property for wall tiling work.

Advantages

FeatureBenefit
Extended open timeMore working time for tile placement and adjustment
High water retentionConsistent cement hydration on porous substrates
Good non-slip contributionSupports safe, stable vertical wall tile installation
Smooth trowel feelEasier spreading and comb-line formation
Reliable fineness and dissolutionFewer lumps and more uniform mortar consistency
Compatibility with RDPImproved flexibility and bond strength in the finished joint

Frequently Asked Questions

  • Q: What is open time and why does it matter for tile adhesive?

    A: Open time is the period after troweling during which the adhesive remains workable enough to properly wet and bond the tile; too short an open time can lead to poor adhesion.

  • Q: How does this additive improve non-slip performance on vertical walls?

    A: By contributing to the internal cohesion and thixotropic behavior of the mortar, it helps the adhesive resist tile slump immediately after installation on vertical surfaces.

  • Q: Can it be used for large-format porcelain tile installation?

    A: Yes, higher-performance grades are commonly selected for large-format and porcelain tile adhesives that require extended open time and strong bond development.

  • Q: Does it need to be combined with RDP for good bond strength?

    A: For most improved-performance (C2-type) adhesives, yes, RDP is typically included alongside the cellulose ether to achieve the required flexibility and bond strength.

  • Q: What is the recommended dosage in a tile adhesive formula?

    A: Dosage is generally around 0.2% to 0.4% by weight of the dry mix, adjusted for the target open time and application conditions.

  • Q: How does substrate porosity affect additive performance?

    A: More absorbent substrates draw water out of the mortar faster, so higher water retention grades or dosages are often needed to maintain workability and hydration.

  • Q: Is it suitable for exterior and wet-area tile applications?

    A: Yes, when formulated appropriately with compatible RDP and other additives, these grades are used in exterior facade and wet-area tiling systems.

About Us
Zhejiang Yisheng New Material Co., Ltd.
Zhejiang Yisheng New Material Co., Ltd. is a professional enterprise engaged in the design, development, manufacturing, application, and sales of cellulose ether, located in the Shangyu Economic and Technological Development Zone, part of the Hangzhou Bay National Industrial Park. With a core concept of safety, environmental protection, and sustainable development, the company boasts an annual production capacity of 15,000 tons of cellulose ether, offering a complete range of products including HEC (hydroxyethylcellulose), HEMC (hydroxyethyl methylcellulose), and HPMC (hydroxypropyl methylcellulose). Our products serve various sectors such as oil fields, coatings, dry powder mortar, cosmetics, personal care products, medicine, and many others. Yisheng has a global presence, providing stable cellulose ethers and services to customers worldwide.
As a professional China Tile Adhesive Formulation Solutions Supplier and Tile Adhesive Formulation Solutions Company, The company adheres to the principles of safety and environmental protection as the foundation of its development. It implements and further consolidates safety and environmental protection measures, striving to create green and environmentally friendly production processes, safe and effective control systems, and orderly production management. This approach lays a solid foundation for the company's sustainable development. Yisheng boasts a scientific management mechanism, a comprehensive quality management system, stringent product testing methods, advanced technology, state-of-the-art equipment, and high-quality after-sales service.
Zhejiang Yisheng New Material Co., Ltd.

+86-18067879812
Zhejiang Yisheng New Material Co., Ltd.

sarah@ys-cellulose.com
Zhejiang Yisheng New Material Co., Ltd.